Are you looking for welding services for your business? Then take a moment to read about the services that are available.

Three Types of Commercial Welding Services

Did you know that analysts expect the global welding industry to reach a value of $27 billion by 2027? Many large companies plan to offer equipment rentals to spur growth throughout the industry.

Are you a business owner looking for welding services to use? Do you know the different kinds of commercial welding technology that exist today?

The following guide will explain common types of welding and fabrication for commercial use. Read on to learn which process might be right for your welding needs.

Shielded Metal Arc Welding

Shielded metal arc welding is a manual technique that uses a consumable flux-coated electrode. This welding method is mostly used by home-shop welders. It’s also referred to as stick welding because the electrode is stick-like.

Stick welding doesn’t require much equipment and the process is fairly inexpensive. It can be done outside even in rain or high winds because it doesn’t require a shielding gas.

Shielded metal arc welding works the best on rusted materials. It’s a good welding repair service for minor fixes. However, the welds are more prone to cracks and less durable than other welding services.

Flux Cored Arc Welding

Flux-cored arc welding uses a continuous wire feed method. There are two different process types linked to this type of welding. One of the types uses shielding gas while the other uses self-shielding agents.

Flux-core is affordable and simple to learn. The arc produces a high welding speed that’s perfect for mobile welding at construction sites. Visit https://swensonwelding.net/ for more portable welding service information.

Gas Metal Arc Welding

Gas metal arc welding uses a thin wire for the electrode. The wire heats up as goes through the welding device. Shielding gas protects the weld from any contaminants like carbon dioxide and oxygen.

The welding method is typically applied to metals like stainless steel, copper, nickel, carbon steel, and aluminum. It’s commonly used in the construction and automotive industries.

There’s minimal cleanup and high welding speeds with enhanced control over thinner materials. Although, shielding gas is expensive and thicker welds aren’t recommended.

Gas Tungsten Arc Welding

Gas tungsten arc welding is usually used to weld thin and non-ferrous materials together. Examples of non-ferrous materials are aluminum, copper, lead, and nickel. Bicycle and aircraft makers often use this welding process.

It uses a non-consumable tungsten electrode to create the weld. It requires an external gas supply like argon or both argon and helium.

Gas tungsten arc is a very difficult welding technique to master. It takes a lot of skill and precision but creates extremely strong welds. In fact, they’re the highest-quality welds compared to those previously mentioned. 

Choosing Welding Services

Now you know some common welding services and what they’re used for. Consider the weld strength your job requires. Also, determine external conditions and the materials before you select a service. 

We hope this guide has helped you understand the basics of welding types. Check out the rest of our site for more helpful tips and fascinating information.

Leave a Reply

Your email address will not be published.