A filter regulator lubricator is essential to maintain your air conditioner and keep your heating and cooling system running smoothly. The device works by changing the air pressure and adjusting the airflow so the compressor can keep up with demand. There are different types of these devices, such as Oil-fog lubricators and micro-fog lubricators.
Oil-fog lubricators vs. micro-fog lubricators
Oil-fog and micro-fog lubricators are specialized lubricators used to reduce friction between moving components. They are based on the principle of atomizing oil droplets into tiny particles.
The smaller the particle size, the greater the distance it can travel. Micro-fog filter regulator lubricator Charlotte NC is better suited for applications where the distance between the lubrication point and the tool is longer. Standard oil-fog lubricators are not efficient in cases where the airflow is inclined or curved.
Micro-fog lubricators can be used for multiple valve circuits and can travel long distances. This makes them suitable for complex piping systems.
Oil-fog lubricators use a reservoir filled with oil. Air is pumped into the reservoir through a venturi. It creates a high-velocity atmosphere that draws the oil through capillaries. A spring-loaded bypass valve directs excess flow around the venturi.
These lubricators can be integrated into filter regulators. In addition, some companies offer integrated units, which combine the functions of a filter, a regulator, and a lubricator in one unit. In addition to reducing the installation’s complexity, this lubrication is easier to maintain.
Air pressure regulators
Air pressure regulators are valves that allow you to adjust the air pressure in your compressed air system. It will enable you to control your airflow, which is essential for safety. There are different pressure regulators, each with unique features and functions. You’ll need to decide on the best regulator for your needs.
The simplest types of pressure regulators are directly operated. They are simple to use and provide a higher level of accuracy. These regulators are designed to work with pressures of less than 0.07 bar.
They may be either self-contained or cartridge-mounted. Cartridge-mounted units are helpful for applications where you need to access valve components. For example, some have a built-in pressure gauge and bleed-off valve.
You’ll want to consider your inlet and outlet pressures for optimal efficiency. If your downstream pressure is low, your regulator will work efficiently. To remedy this, you’ll need to increase the pressure from below the set point slowly.
